[SOLVED??] Initial SMB scan works, subsequent refresh does not

Support questions for Neutron Player only.
Skiddz
Posts: 17
Joined: Sun Aug 02, 2020 3:54 am

Re: Initial SMB scan works, subsequent refresh does not

Post by Skiddz » Mon Aug 03, 2020 5:15 am

The last time I contacted Dmitry about this was after an upgrade to the app back in March, he told me:

"There were 0 changes in SMB code, just minor correction to access SMB
via VPN endpoint but it does not affect any serious SMB code. Test
devices behave ok, SMB is accessed ok, no other similar reports."

blaubär
Posts: 3313
Joined: Tue Apr 02, 2019 6:48 am

Re: Initial SMB scan works, subsequent refresh does not

Post by blaubär » Mon Aug 03, 2020 5:53 am

Well, then I'd definitely try the split-the-big-source-approach ;)

Skiddz
Posts: 17
Joined: Sun Aug 02, 2020 3:54 am

Re: Initial SMB scan works, subsequent refresh does not

Post by Skiddz » Mon Aug 03, 2020 6:09 am

1st screen shot was immediately after the initial scan had completed. I then tapped the X to escape that screen and was presented with the Playlists, Artists, Albums, etc list. All the numbers there match my tablet exactly.

I then tapped Folders and was met with the listing of the folders on the music server. (That screen shot didn't save) I did not navigate further.

I tapped < then tapped Sources and was met with the greyed out MP3S folder.

I then tapped < and poof! All the info is gone.

Tapped refresh to the right of Sources and get 2-3 seconds of flashing yellow, then nothing.

Final screenshot is a tap on Sources, then a long press on the greyed out MP3S then Edit. It's still pointed to the correct folder, it just doesn't work.

If I try to scan again, nothing happens and the server shows no active SMB sessions.

Skiddz
Posts: 17
Joined: Sun Aug 02, 2020 3:54 am

Re: Initial SMB scan works, subsequent refresh does not

Post by Skiddz » Mon Aug 03, 2020 6:10 am

blaubär wrote:
Mon Aug 03, 2020 5:53 am
Well, then I'd definitely try the split-the-big-source-approach ;)
Doesn't explain why this all works fine on my tablet... I've compared settings and as far as I can tell, they're identical.

blaubär
Posts: 3313
Joined: Tue Apr 02, 2019 6:48 am

Re: Initial SMB scan works, subsequent refresh does not

Post by blaubär » Mon Aug 03, 2020 6:47 am

No, it doesn't. But sometimes it is helpful to try things. Especially if you don't know what else to do.

Skiddz
Posts: 17
Joined: Sun Aug 02, 2020 3:54 am

Re: Initial SMB scan works, subsequent refresh does not

Post by Skiddz » Fri Aug 07, 2020 6:21 pm

New "symptom".. Occasionally when I start Neutron, I can tap "back" (Whatever the icon in the upper right corner is when Neutron first starts) and can see all my music listed just for a second - and then it's gone.

Again, is there a log file I can view to see what's going on?

Tablet is still working fine and ran for almost 6 straight hours yesterday.

blaubär
Posts: 3313
Joined: Tue Apr 02, 2019 6:48 am

Re: Initial SMB scan works, subsequent refresh does not

Post by blaubär » Sat Aug 08, 2020 3:52 am

As to the button : You've invoked the tracklist. Then Neutron seems to think your source had vanished, changed, been deactivated or whatever and removes the ( obsolete, as it thinks ) content. For logging purposes please contact neutronmp@gmail.com .

Skiddz
Posts: 17
Joined: Sun Aug 02, 2020 3:54 am

Re: Initial SMB scan works, subsequent refresh does not

Post by Skiddz » Sat Aug 08, 2020 9:46 am

One more question before I pester Dmitry.. Is it possible to change the login details of an SMB source without deleting said source and recreating it?

blaubär
Posts: 3313
Joined: Tue Apr 02, 2019 6:48 am

Re: Initial SMB scan works, subsequent refresh does not

Post by blaubär » Sat Aug 08, 2020 11:07 am

No idea ... you'll have to try it.

Skiddz
Posts: 17
Joined: Sun Aug 02, 2020 3:54 am

Re: Initial SMB scan works, subsequent refresh does not

Post by Skiddz » Sat Aug 08, 2020 4:53 pm

If I could find where...

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 30 guests