More EQ bands needed
Stereo Equalizer ?
Hi,
I suffer from hearing loss in my right ear, so I would like to be able to define equalization at channel level. Is it possible ?
Thank you.
I suffer from hearing loss in my right ear, so I would like to be able to define equalization at channel level. Is it possible ?
Thank you.
Re: How to work with the equalizer
Also applies to the equalizer screen settings. Long press EQ button, then invoke local settings, then change channels from 0 to 2.
Re: How to work with the equalizer
Thank you so much !
-
- Posts: 10
- Joined: Fri Oct 01, 2021 9:11 pm
Parametric EQ or Frecuency Correction?
I have my own AutoEQ profile for my IEMs and I want to know what option I have to choose? I mean if I want to use my AutoEQ i should import the EQ settings and activate the Frecuency Correction or the Parametric EQ?
Re: How to work with the equalizer
Speaking in broader terms both EQ and FRC are parametric equalizers. The difference lies in the position that these filters have in the audio data processiong chain. The EQ is situated after the decoding and before the stereo effects ( so its typical use would be to adapt the music according to the listener's preferences ). The FRC comes after the stereo effects before the DAC ( and is typically used to mitigate shortcomings of the sound transducers and/or the listener's hearing ). The important point with Neutron is that both can be used indepently and simultaneously. So the typical use would be to define an FRC preset for each of your headphones and then use the EQ to adapt the music to further needs.angelooo-18 wrote: ↑Fri Oct 01, 2021 9:14 pmI have my own AutoEQ profile for my IEMs and I want to know what option I have to choose? I mean if I want to use my AutoEQ i should import the EQ settings and activate the Frecuency Correction or the Parametric EQ?
-
- Posts: 10
- Joined: Fri Oct 01, 2021 9:11 pm
Re: How to work with the equalizer
In the case that I want to use the correction of the Frecuency Response of the Speaker/IEM I have to use the FCC?
Re: How to work with the equalizer
You don't have to, you could also use the EQ, but I would suggest you use the FRC, that would be as it is supposed to be used.angelooo-18 wrote: ↑Sat Oct 02, 2021 5:02 pmIn the case that I want to use the correction of the Frecuency Response of the Speaker/IEM I have to use the FCC?
Re: How to work with the equalizer
Do you not get to see the full 10 band of sliders if u select 10 band eq? All i get is the standard 4 sliders? Note this is the free version.
Re: How to work with the equalizer
Free or not free doesn't matter. We're speaking of the equalizer screen : if you choose an equalizer preset ( not frc preset - that's not shown on this screen ) with more than 4 sliders then another horizontal slider appears below the eq sliders. It might need a bit of patient pressing to get it activated. Once it is activated you can switch through the eq sliders.
Who is online
Users browsing this forum: No registered users and 33 guests