USB DAC support on USB OTG enabled devices

Submit your proposals and ideas here.
Fahrenheit
Posts: 42
Joined: Wed Feb 26, 2014 8:03 am

Re: USB DAC support on USB OTG enabled devices

Post by Fahrenheit » Fri Oct 23, 2015 8:31 am

muddy wrote:
Fahrenheit wrote:yesterday I bought an iBasso D-Zero MK2 portable DAC/AMP, and I can tell it works like a charm connected to my HTC One X+ (running 4.2 rooted), together with Philips FIdelio M1 mkII headphones and NMP (of course!). The sound is actually more clear and bright, with a great instrument separation. :D
How did you get it working with the D-Zero Mk2 it does not see it at all for me, only worked on the FiiO Q1 until this latest update.
I dunno .. maybe the HTC One X+ has some particular hardware that match better with D-Zero Mk2 :?:

did you allow the "USB debugging"?

muddy
Posts: 9
Joined: Wed Oct 21, 2015 8:47 pm

Re: USB DAC support on USB OTG enabled devices

Post by muddy » Fri Oct 23, 2015 2:42 pm

Yes, maybe because I've got it rooted as well?
Not sure myself, been a frustrating adventure.

Fahrenheit
Posts: 42
Joined: Wed Feb 26, 2014 8:03 am

Re: USB DAC support on USB OTG enabled devices

Post by Fahrenheit » Mon Oct 26, 2015 10:28 am

muddy wrote:Yes, maybe because I've got it rooted as well?
Not sure myself, been a frustrating adventure.
I'm rooted too ..

however, after the last updates (since 1.86.0), Neutron crashes if the DAC/AMP is already on
I have to start Neutron first and then turn on the DAC/AMP

ramsa
Posts: 4
Joined: Mon Aug 10, 2015 6:57 am

Re: USB DAC support on USB OTG enabled devices

Post by ramsa » Thu Oct 29, 2015 1:47 pm

at 10/29 new ver.
NMP will work good on Fiio E-18 at hTC M8

but when other sound effect play in system ex:botton sound / message sound etc.
NMP will crash and let phone work bad ....

otaku313
Posts: 20
Joined: Wed Jan 02, 2013 3:25 pm

Re: USB DAC support on USB OTG enabled devices

Post by otaku313 » Mon Nov 09, 2015 5:37 pm

I just got my Kindle Fire 5 working with an AudioQuest Dragonfly and a generic USB OTG cable. Sounds good with my ATH A900's, and just killer with the (much cheaper) Grado SR-60's.
Also using a USB power injector cable to power the DAC (not necessary, but helps the battery life, since I obviously cannot plug into AC while the DAC is plugged in.)

Ralph
Posts: 4
Joined: Sun Aug 11, 2013 4:44 pm

Re: USB DAC support on USB OTG enabled devices

Post by Ralph » Thu Dec 17, 2015 7:12 pm

The new version finally supports my Sony MDR 1 ADAC, but sadly the sound is horrible, it is full of clicks, even with the most basic settings.

pernel09h
Posts: 2
Joined: Tue Dec 22, 2015 8:08 am

Re: USB DAC support on USB OTG enabled devices

Post by pernel09h » Tue Dec 22, 2015 8:14 am

This is fantastic!




---------------------------------
coque galaxy note 5 coque samsung galaxy note 5

atwatervillagelawyer
Posts: 1
Joined: Thu Jan 28, 2016 9:29 pm

Re: USB DAC support on USB OTG enabled devices

Post by atwatervillagelawyer » Thu Jan 28, 2016 9:35 pm

Hi,

I am using the neutron mp on the samsung galaxy note 3 and wishing to play it through a chord mojo dac/amp with headphones. The chord mojo plays high res files off my pc. For some reason when I play high resolution files like 24-96 on the samsung using neutron mp it will not play it only at 44.1 on the chord mojo. Why is the neutron music player or the samsung phone doing this?

thanks

Michael

Oppo
Posts: 2
Joined: Fri Feb 26, 2016 3:13 am

Re: USB DAC support on USB OTG enabled devices

Post by Oppo » Fri Feb 26, 2016 3:16 am

Below please find some more information on which HW/SW configurations glitches/clicks appear too. Please tell if you will need more info.

For me this issue happens on multiple phones/Neutron settings, and details below describe settings where issue DOES occur, unless stated otherwise. I tried different settings, which in my opinion could eliminate glitching, but did not succeed. Below I provide only the settings, which are applicable IMO.

==================================

1. Phone: HTC 1 M8
Neutron versions: 1.87.1, 1.88.1
64-Bit Processing: on/off
VEC: NEON
DRV: OpenSl ES
Direct USB driver: on
32-bit Output: on/off
Frequency: 48000
Hardware latency: 2-192

**********************************
2. Phone: Alcatel 8008D: issue never occurs
Neutron versions: 1.87.1, 1.88.1
64-Bit Processing: on/off
VEC: NEON
DRV: OpenSl ES
Direct USB driver: on
32-bit Output: on/off
Frequency: 44100
Hardware latency: 2-192
**********************************

In below two configurations audio data is sent via USB to external DAC "Oppo HA-2", and this is where
severe glitching/clicking occurs.

3. Phone: HTC 1 M8
Neutron versions: 1.87.1, 1.88.1
64-Bit Processing: on/off
VEC: NEON
DRV: Oppo
Direct USB driver: on
32-bit Output: on/off
Frequency: 44100-352800
Hardware latency:
0-30: extreme glitching
300-400: less glitching

4. Phone: Alcatel 8008D
Neutron versions: 1.87.1, 1.88.1
64-Bit Processing: on/off
VEC: NEON
DRV: Oppo
Direct USB driver: on
32-bit Output: on/off
Frequency: 44100-352800
Hardware latency:
0-30: extreme glitching
300-398: less glitching

Audio source: MP3, FLAC, WAV, WV, with whole bunch of different frequencies, 16-bit; it seems that on some MP3s glitching/clicking is much worse, than on FLACs, surprisingly.

================================

It seems, that on HTC 1 with external DAC plugged in glitching disappears after long continuing listening. (I cannot tell exactly after which period of time, and I'm not sure here), but once another song is selected or forwarded to - glitching always reappears.

NOTE: the same issue with glitching occur in Onkyo HF player, when data is sent through USB to external DAC, hence I believe the problem exists not only in Neutron player.

m-i-c-k-e-y
Posts: 4
Joined: Tue Apr 12, 2016 1:05 pm

Re: USB DAC support on USB OTG enabled devices

Post by m-i-c-k-e-y » Tue Apr 12, 2016 1:21 pm

Thank you Dmitri for the USB OTG and DSD support on the Neutron MP. I can say its SQ is really awesome (with Dither, Audiophile Sampling, 64bit processing etc.) on.
My LH Labs Geek Pulse INfinity sings playing DSD64. DSD128 have cracks and bit some skips (maybe due to CPU?). Have a Samsung Galaxy Note 3 as player.

Again thanks for those important features.

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests