Release Notes - Recorder

Submit your proposals and ideas here.
Locked
dmitrykos
Site Admin
Posts: 1975
Joined: Mon Apr 25, 2011 6:15 pm

Release Notes - Recorder

Post by dmitrykos » Thu Nov 26, 2020 7:28 pm

Code: Select all

1.07.3 (04.2024):
* New:
 - loudness measurement: improved the RMS widget to show wider loudness scale from -60 to 3 dB
 - show dB moving average value inside RMS widget for convenient reading of loudness
* Core updates and fixes inherited from Neutron Player release 2.24.0

1.07.2 (03.2024):
* New (Output Format behavior):
 - Channels: Requests hardware to provide a stream with the same or similar number of channels
 - Frequency: If Audio Hardware - Frequency = DEFAULT, then requests hardware to provide a stream with the same or similar frequency
 - Channel Multiplexer: Shows only channels supported by the hardware
! Fixed:
 - Inconsistency between displayed format and actual recording format during recording

1.07.1 (12.2023):
! Fixed:
 - Bode Plot of individual EQ filters not shown (regression of 2.23.0) when EQ - Cumulative Bode Plot is Off
 
1.07.0 (12.2023):
* New:
 - 32 and 64-bit floating point (fp) sample format support for WAV format
* Show PCM format details (codec, bits) in Recorder setup dialog
! Fixed:
 - possible occasional interruptions when recording in background
 - memory corruption by Equalizer DSP if configured for >4 channels

1.06.10 (10.2023):
* New:
  - support max 10 output/input channels (was 8) to be compatible with 10-channel USB ADC/DACs
* Show multi-line name of input device
* iOS: Support individual input device selection via Devices

1.06.9 (09.2023 - iOS):
* iOS: Support for unprocessed input (select audio devices with [Unprocessed] tag to get audio data unprocessed by the OS)
* Updated network subsystem for better compatibility with servers (network source)

1.06.8 (08.2023):
* Targeted Google Play apk to Android 13 as per Google's requirement (note: if your source entry became inaccessible or empty - recreate new via SAF, see FAQ on website about it)
! Fixed:
 - Filter DSP: Q giving insufficiently steep slope for Shelf filters (HS, LS)
 - file access permission access requested again on start in some cases

1.06.7 (03.2023):
Android:
! Fixed:
 - OGG or SPEEX files are saved as OGA if SAF source is used as destination
 - broken recording when phone state changes (recording silence): now, when phone becomes active the recording or monitoring process will stop and auto-restart when phone becomes inactive with recording into a new file
Apple iOS:
 - support for accessing external storage (USB drive and etc) connected via Apple Lightning USB port as well as Document folders of other local apps: Sources - + - File System - + - add permission to access external folder on external drive or another local app's folder
 
1.06.6 (02.2023):
* Changed Recording - Monitoring behavior: Recording mode - singe tap on Record button, Monitoring mode - long-press on Record button
* Enabled Output To: to output/play recordings to UPnP/DLNA renderers or Chromecast device
* Improved compatibility with Android 11+
! Stability fixes accumulated from NMP

1.06.4-5 (09.2022):
* Long pressing large or small Record buttons starts immediate recording (Monitoring mode is skipped).
* Improved SFTP and file-system Android SAF sources operation.
* Fixed:
 - Waveform UI showing level value 0.5 instead of 0.05;
 - no input devices available if 64-bit Processing option is switched on (1.06.4: Apple iOS only);
 - if Stop is pressed while in Monitoring mode the sub-sequent monitoring attempt does not succeed.

1.06.3 (06.2022 - Apple only):
! Fixed landscape mode for all iPhone models with on-display camera inset.

1.06.2 (06.2022):
* Fixed (regression of 1.06.0-1):
 - Recording Now settings always disabled;
 - progress reset to 0 if recording is paused and resumed.

1.06.1 (06.2022):
* Fixed (regression of 1.06.0):
 - unable to pause/stop playback;
 - unresponsive UI while monitoring.

1.06.0 (06.2022):
* Monitor mode: pressing small Record button or when no session is started will put recorder into a monitoring mode, e.g. RMS, Waveform and Spectrum are active but output file is not filled with data.
* Full SAF source support (also for write access for SD).

1.05.0:
* New Silence Detection DSP option (see in Recording settings): detects and skips silence during the recording or during playback. Replaced Dither button in Controls. Dither is still accessible via Audio Hardware.
* When recording (if activated for Recording profile): silence is not recorded thus file is not growing until sound is detected.
* When playing (if activated for Playback profile): silence is quickly skipped during playback.   
* New recording indicator is red when audio data is being captured and sent to a file or goes white when silence is detected and audio data is skipped and not written to a file.

1.04.0:
New:
 - output device selection: Audio Hardware -> Device (Playback);
 - fractional time below 0 for Attack and Release of Compressor DSP.
Fixed: 
 - default recording profile is not used if user did not select own;
 - some USB ADCs could not be selected in case of own USB driver (Direct USB Access);
 - Dither and AGP UI could be indicating false On state;
 - occasional various crashes.

1.03.1:
Fixed:
 - possible bug with starting 0s in the track (regression of 1.03.0).

1.03.0:
* New:
 - Channel Multiplexer option: to record individual channel into a Mono file;
 - Profile (recording only): to configure DSP profiles for different needs;
 - Ability to bind profile to an input device.
* Show recording time in a higher resolution.
Fixed:
 - trailing 0s in the recording for some input devices (USB ADCs) when paused/stopped recording;
 - frequency of the previous device used when switching devices (to USB ADCs);
 - large Spectrum view shows incorrectly scaled filter's bode plot;
 - crash of SMB connection if incomplete reply.

1.02.0:
* Support for direct USB ADC access to support ADC's extended format (up to: 8 channels, 768 kHz, 32-bits): use Audio Hardware - Direct USB Access option to enable it, select USB device in the device list.
* Show audio driver type in device list.
* Try to re-create source referenced folder if it was deleted by mistake.
* If no active source available when recording is started create the default folder to succeed.
* Activate the next available source entry if current entry is ignored explicitly.
! Fixed:
 - audio device name not updated in the Recording settings.
 
1.01.1:
* Preserve network file when refreshing integrity to avoid blocked loading.
* Do not invalidate SMB source if shares were not detected but server is responding.
* Improved SMB source health detection on start and prevented SMB track unloading when health is being checked.
! Fixed:
 - external SD not detected on Samsung's Android 11.
  
1.01.0:
* New:
 - output bits selection for lossless PCM formats (FLAC, WAV): 8, 16, 24, 32;
 - output channels (format) selection.
* Disable Recording setup icon while recording to avoid unwanted interaction with a process.
* Enable Connection and Controls settings group - control of the playback start/stop condition.
* Output (format) frequency selection moved to the Recording settings.
! Fixed:
 - visible system background under the transparent panels;
 - AGP is always set to On when in Playback mode when restarted;
 - occasional crash.
Windows:
! Fixed:
 - could not pause and resume recording.

Locked

Who is online

Users browsing this forum: No registered users and 3 guests