Bind HW/SW Latency to Profile
Bind HW/SW Latency to Profile
Seeing as most (if not all) Audio Hardware sub-menu options are bound to profiles, it would make sense for the values from Hardware Latency, Time and Software Latency, Time sliders to be tied to these profiles as well. My DAP needs different values for VU meter/spectrum/waveform to remain in sync on hardware outputs vs Bluetooth outputs. Thanks!
Re: Bind HW/SW Latency to Profile
You're sure this isn't better optimized with "Settings > User Interface > Spectrum Analyzer > Delay" ?WitzyZed wrote: ↑Sat May 28, 2022 2:38 pmSeeing as most (if not all) Audio Hardware sub-menu options are bound to profiles, it would make sense for the values from Hardware Latency, Time and Software Latency, Time sliders to be tied to these profiles as well. My DAP needs different values for VU meter/spectrum/waveform to remain in sync on hardware outputs vs Bluetooth outputs. Thanks!
Re: Bind HW/SW Latency to Profile
I can’t say it does the job better, rather it does not achieve the same result.
Setting Delay, Time (msec) to 340 in User Interface -> Spectrum Analyzer sub-menu does not achieve the same result as setting Hardware Latency, Time (msec) to 340.
Setting Delay, Time (msec) to 340 in User Interface -> Spectrum Analyzer sub-menu does not achieve the same result as setting Hardware Latency, Time (msec) to 340.
Re: Bind HW/SW Latency to Profile
Well, the two aren't supposed to do the same as I understand it ... which doesn't mean I really understand what the latency settings do but I would guess with these you tell Neutron to set an upper limit for certain delays. And with the Delay setting you tell Neutron to manually delay the spectrum to match the delayed sound. From what you want to achieve - spectrum synchronized with music - I would think the spectrum delay might be the more appropriate setting.
Who is online
Users browsing this forum: No registered users and 6 guests