Requests

Submit your proposals and ideas here.
RMartinez
Posts: 5
Joined: Wed Apr 22, 2020 2:23 pm

Requests

Post by RMartinez » Wed Apr 22, 2020 3:01 pm

1. Great sounding software!
2. Please make a balance slider on the panel or EQ screen. Some recordings need a slight balance correction. It's awkward where the balance slider is now. It does not have to be full range adjustment. Perhaps 10% of the full effect.
3. Can you provide more information on the ultrasonic filter. The theory behind its use in your software. How to make beneficial adjustments. What determines which preset should be used. It seems very configurable, but unusable without more information.
Thank you.

blaubär
Posts: 3312
Joined: Tue Apr 02, 2019 6:48 am

Re: Requests

Post by blaubär » Wed Apr 22, 2020 4:18 pm

Well, the "Ultrasonic Filter" is just a low pass filter that stops anything above a certain frequency. It is generally assumed that nobody can hear anything above 20 kHz or so ( bats exluded :D ). But there are people who think they can hear these frequencies no matter what science says. So if you belong to that group and don't want to miss the fun, don't activate this option. I think the original purpose of this together with the subsonic filter was to protect the amplifier and loudspeaker for the case of technical disturbances in the music - why amplify and convert something into sound that you don't hear anyway and that might harm the equipment ?

ultrasonic.PNG
ultrasonic.PNG (25.88 KiB) Viewed 2781 times

blaubär
Posts: 3312
Joined: Tue Apr 02, 2019 6:48 am

Re: Requests

Post by blaubär » Wed Apr 22, 2020 4:25 pm

RMartinez wrote:
Wed Apr 22, 2020 3:01 pm
What determines which preset should be used. It seems very configurable, but unusable without more information.
If this asks generally how to use the equalizer : there are typically two aims for use of an eq. Some people want to change the music so that it sounds better ( bass enhancements etc ). To do that just try it out. Other people want NOT to change the music but hear it how it would sound if they could afford perfect equipment. Of course this isn't really possible, but you can try to mitigate the worst shortcomings of the hardware you use, e.g. example for headphones DT-880

RMartinez
Posts: 5
Joined: Wed Apr 22, 2020 2:23 pm

Re: Requests

Post by RMartinez » Wed Apr 22, 2020 4:43 pm

My concern is amplifying ultrasonic frequencies that could damage my hearing, etc.

blaubär
Posts: 3312
Joined: Tue Apr 02, 2019 6:48 am

Re: Requests

Post by blaubär » Wed Apr 22, 2020 6:48 pm

RMartinez wrote:
Wed Apr 22, 2020 4:43 pm
My concern is amplifying ultrasonic frequencies that could damage my hearing, etc.
Then you should activate it and set the cutoff-frequency at a reasonable low value, e.g. 20 kHz

RMartinez
Posts: 5
Joined: Wed Apr 22, 2020 2:23 pm

Re: Requests

Post by RMartinez » Wed Apr 22, 2020 9:56 pm

Ok. I'll do that. Thanks.
Any chance on getting a balance slider on the panel or EQ screen. Make it an option?

blaubär
Posts: 3312
Joined: Tue Apr 02, 2019 6:48 am

Re: Requests

Post by blaubär » Thu Apr 23, 2020 5:20 am

RMartinez wrote:
Wed Apr 22, 2020 3:01 pm
2. Please make a balance slider on the panel or EQ screen. Some recordings need a slight balance correction. It's awkward where the balance slider is now. It does not have to be full range adjustment. Perhaps 10% of the full effect.
I cannot reproduce that, works from -1 to +1 for both stereo and mono on windows and android for me

bal-1.PNG
bal-1.PNG (5.91 KiB) Viewed 2763 times
bal-2.PNG
bal-2.PNG (5.48 KiB) Viewed 2763 times
bal-3.PNG
bal-3.PNG (5.45 KiB) Viewed 2763 times
RMartinez wrote:
Wed Apr 22, 2020 9:56 pm
Any chance on getting a balance slider on the panel or EQ screen. Make it an option?
I guess the chances are rather low, as this would be a huge effort for a rather limited functionality. When in doubt feel free to contact neutronmp@gmail.com, they'll know.

RMartinez
Posts: 5
Joined: Wed Apr 22, 2020 2:23 pm

Re: Requests

Post by RMartinez » Thu Apr 23, 2020 1:30 pm

Thank you

Lavi Jaat 1232
Posts: 72
Joined: Fri Apr 10, 2020 11:14 am

Re: Requests

Post by Lavi Jaat 1232 » Fri Apr 24, 2020 4:33 am

RMartinez wrote:
Wed Apr 22, 2020 3:01 pm
2. Please make a balance slider on the panel or EQ screen. Some recordings need a slight balance correction. It's awkward where the balance slider is now. It does not have to be full range adjustment. Perhaps 10% of the full effect.
You can quickly access the Balance Slider by long pressing on the Preamp button in Equaliser pane which will take you to Audio Hardware menu.
Attachments
IMG_20200424_095844.jpg
IMG_20200424_095844.jpg (37.3 KiB) Viewed 2742 times

RMartinez
Posts: 5
Joined: Wed Apr 22, 2020 2:23 pm

Re: Requests

Post by RMartinez » Sun Apr 26, 2020 4:41 pm

Is there any way to reinstall Neutron? (Win 10). It is not responding to any input. The mouse scroll feature works, but otherwise not responsive. Not listed as a program in control panel, where I usually delete programs.

Post Reply

Who is online

Users browsing this forum: No registered users and 12 guests